Gemlight GMB-486UN, Руководство пользователя

Страница: 35 / 41

Chapter 4
+
4.6 CHANGE PASSWORD
The Main Menu item lets user to configure the system so that a password is
required every time the system boots or an attempt is made to enter the Setup
program.
The password cannot be longer than 6 ASCII characters. A default password
is stored in the ROM in case the CMOS is corrupted. The default password is
<AMI>. To change the password choose "Change Password" in the Main
Menu and press <Enter>.
When user next boot the system, after saving changed value to CMOS, user
will be prompted for the password.
If user is not prompted for the password, check that the "Password Checking
Option" in the Advanced CMOS Setup is configured for "Always" or "Setup".
See the section above on "Advanced CMOS Setup."
When the password prompt appears, key in the new password and press
<Enter>. If loose or disconnected batteries corrupt the CMOS, use the default
password, <AMI> instead.
Important:
Keep a safe record of the new password. If forget or lose
the password, the only way to access the system is to
disconnect the CMOS batteries and then re-use the default
password <AMI>.
4.7 HARD DISK UTILITY
This Main Menu item gives user three options for analyzing and formatting a
hard disk. The three options are:
• Hard Disk Format - performs a "low level" format of the hard disk.
Check with the hard drive manufacturer to see if this option is
required.