Gemlight GMB-486UN, Руководство пользователя

Страница: 22 / 41

Mainboard Installation
3.2 INSTALLING THE MAINBOARD
Before starting, check the location of the mounting holes in the case and on the
mainboard.
- .
"
Install the GMB-486UN mainboard as follows:
1.
Review the section on static electricity precautions at the beginning of
this manual.
2. Place the case on an anti-static mat and remove the cover. Remove
the nylon stand-offs and screws for mounting the mainboard.
3. Put the front of the case to the right and the rear to the left. The
mainboard occupies the section of the case nearest the user; the power
supply goes on the far side.
4. Align the mounting holes on the case to the mounting holes on the
mainboard. Make sure to access the keyboard connector (J1) once
the board is installed.
5. From the bottom of the mainboard, insert stand-offs into the proper
holes on the board, and attach the mounting screws to the bottom of
the case.
/ . - 011 - " 23
- 1 2
"- 2
6. Place the mainboard into the case and fasten the board securely with
regular screws.
3.3 CONNECTION THE MAINBOARD
Once the mainboard have been fastened into the system case, the next step is to
connect the internal cables. The internal cables are wire leads with plastic
female connectors that attach to the connectors. The mainboard connectors
have varying numbers of pins and are the points of contact between the
mainboard and other parts of the computer.
A description of each connector and its connector pins follows. See Fig 6 for
the location of the connectors on the mainboard.
/ . 1 4" 5 4 -
2 - 11