GX SERIES
INTRODUCTION
Congratulations on your purchase of a Gemini GX Series loudspeaker. Your product is backed by a 1 year limited warranty. With proper care and
maintenance your speaker will provide you with years of reliable service. Please register your product online at WWW.GEMNIDJ.COM or by using
the included form at the end of this manual.
4
CONTROL ELEMENTS
FUSE HOLDER/VOLTAGE SELECTOR
and
MAIN POWER CONNECTOR
. Please make sure that your local
voltage matches the voltage indicated on the unit, before you attempt to connect and operate your GX SERIES
loudspeaker. Blown fuses may only be replaced by fuses of the same type and rating.
Use the
POWER
switch to put your
GX SERIES
loudspeaker into operation.
MAIN INPUT.
These
XLR
connectors
(GX-801 and 1001)
and
XLR
,
1/4”
and
RCA
connectors
(GX-1201 and
1501)
are the inputs for the signal source. The
GX-801
allows you to choose what input type the
XLR
will be,
simply by using
Switch
you can choose weather the
XLR
input is a
LINE
level input or a
MICROPHONE
input. The
GX-1001
has separate
XLR
inputs for
MIC
and
LINE
and are adjustable individually. The
GX-1201
and
1501
as well as having individual balanced
XLR
inputs for both
MIC
and
LINE
they also have
UNBAL-
ANCED 1/4
” input for
MIC
and
UNBALANCED RCA
inputs for
LINE
level input.
AUX INPUT
The
GX-801
has an
UNBALANCED RCA AUX INPUT
and the volume is controlled by the master
volume. The
GX-1001/1201 and 1501)
have both
BALANCED
(
XLR
) and
UNBALANCED
(
RCA
) and allow
you to connect an auxiliary input source, if both
MAIN INPUT
and
AUX INPUT
are connected simultaneously
both inputs will be heard.
LINE OUTPUT
is directly connected to the input and or inputs of the
GX SERIES
loudspeaker and provides a
one-to-one copy of the input signal, for example, to loop the input through to the input of another device
(e.g. a second
GX SERIES
loudspeaker).
POWER
and
CLIP LED
The
POWER LED
will illuminate when the system is in operation. The
CLIP LED
will
illuminate when the system is overloading, running your
GX SERIES
loudspeaker at
CLIP
levels is not recom-
mended and will cause the internal amplifier to fail and or the
MAIN POWER FUSE
to blow.
The
VOLUME
level governs the overall volume level of you
GX SERIES
loudspeaker.
The
MIC GAIN/LEVE
L rotary governs the
GAIN (GX-801)
and or
LEVEL (GX-1001,1201 and 1501)
of the
MICROPHONE INPUT.
The
LINE LEVEL
rotary adjust the volume of the
INPUT
and
AUX INPUT
Channels
(GX-1001,1201 and 1501).
TONE/EQ (BASS and TREBLE) CONTROLS TONE (GX-801)
will adjust the overall treble output of the
GX-801
by turning to the left you will hear less high end frequencies and by turning the rotary to the right you
will hear more high end frequencies.
EQ (BASS and TREBLE) (GX-1001,1201 and 1501
) The
(TREBLE)
rotary will adjust the high end frequencies
and the
(BASS)
rotary will adjust the low end frequencies of the overall output of the
GX SERIES
loudspeaker.
MIC/LINE SWITCH (GX-801 only)
you can choose weather the
XLR
input of the
GX-801
will be a
LINE LEVEL
input or a
MICROPHONE
input.
NOTE: USING THIS INPUT WITH A LINE LEVEL SOURCE WHILE
SWITCHED TO THE MIC POSITION MAY CAUSE THE SPEAKER TO OVERLOAD!
.
CAUTIONS:
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock , do not open the unit .
there are NO USER OR SERVICABLE PARTS INSIDE please refer
servicing to a qualified Gemini Sound Products service technician.
In the USA: If you experiance
problems with this unit, please call
1(732) 346 0061 for Gemni Customer
Service. Do not attempt to return this
equipment to your
dealer
1
2
3
11
4
5
6
7
8
9
10
11
((PPO
OW
WEERREED
D
SSPPEEAAKKEERRSS))
((PPAASSSSIIV
VEE
SSPPEEAAKKEERRSS))
For the
GX-800, 1000, 1200
and
1500
use a
SPEAKON™
cable from your amplifiers speaker output to the
SPEAKON™
input jack.
12
