SOUND SUPPRESSOR MODEL BLACKSIDE-40
P. 7
.
3. Coat the internal parts of the L.I.D. with a light coat of grease (such
as wheel bearing grease or Superlube with Tefl on). This includes not only
the piston, but also the spring, inside of the encapsulator, and mating
surface of the rear of the suppressor.
4. Install all parts in the reverse order of disassembly (refer to drawing
on previous page). Screw the encapsulator as tight as possible by hand
(with out tools).
PHYSICAL SPECIFICATIONS
Length 6.5 inch (165 mm)
Diameter 1.37 inch (32 mm)
Weight 10 ounce (285 gm)
Construction
Aluminum
Finish Type III, Class 2 black anodized
