background image

SOUND SUPPRESSOR MODEL BLACKSIDE-40 

P.

sor in place. At this time, adjust sights as necessary.

2. Install the suppressor and shoot another group. Note where the 

group center is located with respect to the non-suppressed group. If there 
is no shift, you are through.

3. If the POI shift is not in the vertical axis, note the approximate 

amount of rotation and direction that will be required to place the group in 
the vertical axis.

4. With the weapon unloaded and the action locked open, hold the 

pistol with one hand, pull out the suppressor with the other hand until at the 
limit of the spring.

5. Rotate the suppresor by the amount determined in step 3 above and 

release tension so that the suppressor snaps back into position.

6. Repeat shooting a group for accuracy. It may be necessary to repeat 

steps 3, 4, and 5.

CHARGING THE ARTIFICIAL ENVIRONMENT:

Light liquids can be inserted through the rear of the suppressor with 

a squeeze bottle. The correct amount is about 1/2 teaspoon (2.5 cc). The 
baffl e system is designed to hold liquids and will do so up to a day. 

Light oils are best squirted into the rear of the suppressor with a squeeze 

bottle or from an aerosol dispenser. When using oil, it is not necessary to 
coat the entire inside of the suppressor. It is acceptable to squirt it into the 
rear 2 baffl e areas only.

Greases, at this time, are best “spooned” into the rear of the suppressor 

with a small wood or plastic applicator. Grease is ONLY introduced into the 
rear chamber. Shooting the weapon will distribute the grease throughout 
the remainder of the suppressor. 

DO NOT

 pack the entire suppressor with 

grease. Alternatively, grease can be inserted from the front with a long ap-
plicator attached to a hand-operated grease gun. The proper amount will be 
instilled with approximately 6 strokes of a hand grease gun.

DO NOT OVERFILL the suppressor with grease or liquid and be 

certain that the bore passage remains clear. Failure to observe this 
precaution can result in excessive pressure within the suppressor 
body and damage to the suppressor.

4

Содержание GEMTECH BLACKSIDE-40












Отзывы: