Gemini CDJ-202 Скачать руководство пользователя страница 5

Страница: 5 / 19

CDJ-202

FUNCTIONS:

(CONTINUED)

SINGLE:

Pressing the

SINGLE

button engages

SINGLE

mode, in this

mode the

CDJ-202

will play one song and then stop. Pressing the

SIN-

GLE

button again will then activate

CONTINUOUS

mode causing the

unit to play continuously (after the last track, the unit will return to the
first track of the disc and continue to play).

TIME

: The

TIME BUTTON

switches the time display between three

available sources, these three are

TIME ELAPSED

on the track,

TIME

REMAINING

on the disc and and

TIME REMAINING

on the track.

TIME ELAPSED

indicates how much time has currently gone by since the

play button was pressed,

TIME REMAING ON DISC

will count down the

time remaining on the entire disc and

TIME REMAINING ON TRACK

counts down the time that is left before the end of the track.

PITCH:

Pushing and holding the

PITCH

button (the button will light up)

activates the

PITCH CONTROL SLIDE

. You can then select which PITCH

percent you want by pressing the PITCH button and choosing /-
8%, 12% and 24% depending on which LED is illuminated. Push and
hold the

PITCH

button again to deactivate this mode.

PITCH CONTROL SLIDE

: Moving the

PITCH CONTROL SLIDE

up or down will lower or raise the pitch perc or - 24%.

PITCH BEND

: Pushing the

PITCH BEND BUTTONS

will automatically

raise the pitch up to +26% or lower the pitch down to -26% from the
existing pitch setting. Releasing the buttons will return the pitch
to the original pitch setting. You can use this function to match the beat
when mixing from one song to another

LOOP SECTION

: A

LOOP

repeats the section between the entry point

(

) and the exit point (

OUT

). To set a loop while the unit is playing,

start by pressing the

IN BUTTON

(it will light up) and when you reach

the desired end loop point press the

OUT BUTTON

(it will also light up).

The loop will continue playing until you press the

OUT BUTTON

again

allowing the music to continue from that point on, to re-engage the loop
you must press the

RELOOP BUTTON

. When you have released your

loop the

OUT BUTTON

will turn

OFF

and the

IN BUTTON

will remain lit

to indicate that your loop is stored in the

CDJ-202

memory. Pressing the

IN BUTTON

again while the unit is playing will erase the previously

saved loop while saving your new loop entry point. Press

OUT

to exit

the loop and save a new complete loop.
Press

RELOOP

to return to the beginning of the previously saved loop

from normal play. Press

RELOOP

repeatedly to cause the loop to stut-

ter.

NOTE: THE FIRST LOOP WILL HAVE A PAUSE AT THE EXIT POINT, WHILE ALL OTHERS

WILL BE SEAMLESS.

PLAY/PAUSE

: Each press of the

PLAY/PAUSE BUTTON

causes the operation to change from

PLAY to PAUSE

or from

PAUSE

back to

PLAY

. The

PLAY/PAUSE BUTTON

remains lit when in

PLAY

mode, while it blinks in

PAUSE

mode.

CUE

: While the unit is playing and after the cue point has been

programmed, pressing

CUE

will cause the

player to enter the

PAUSE

mode (

PLAY

PAUSE BUTTON

blinks) at the programmed cue

point (the

CUE LED

is lit). Holding down the

CUE

button

changes the function to preview , and allows you to stutter start or play
from the programmed

CUE POINT

Releasing the

CUE

button will return

the

to the preset

CUE

point.

TRACK SELECTION ROTARY

: The

TRACK SELECTION ROTARY

allows you to select the next or previous track by either turning it
clockwise to go forward or counter-clockwise to go back.

NOTE : ONCE YOU HAVE SKIPPED TO ANOTHER TRACK, YOU MAY NOT GO BACK
TO YOUR PROGRAMMED CUE POINT. YOU MUST BEGIN YOUR CUE SELECTION
OVER AGAIN, THE CUE WILL BE PRESET TO THE BEGINNING OF THE NEWLY SE-
LECTED TRACK.

TROUBLESHOOTING:

- If a disc will not play, check to see if the disc was loaded correctly
(label side up). Also check the disc for excessive dirt, scratches, etc.

- If the disc turns but there is no sound, check the cable connections,
if they are ok, check your amplifier or receiver.

-If the CD skips, check the CD for dirt or scratches. Do not assume that
the CD player is defective. Many cd’s are recorded out of spec and
will skip on most or all CD players. Before sending the unit for repair,
try playing a CD that you are sure plays properly.

SPECIFICATIONS:

GENERAL:

Type..................................................................................Compact Disc/CD-R
Disc Type...................................Standard Compact discs (12 cm & 8 cm)
Time Display.....................Track Elapsed, Track Remain, or Total remain
Variable Pitch..........................................................................± 24 % Slider
Pitch Bend............................................................................± 26% Maximum
Instant Start....................................................................Within 0.03 seconds
Dimensions:..................................................................11.0" x 3.5" x 11.75"
..............................................................(279.4 mm x 88.9 mm x 298.4 mm)
Weight Per Unit...............................................................5.78 lbs. (2.62 kg)

AUDIO SECTION:

Quantization......................................1 Bit Linear/Channel, 3 Beam Laser
Oversampling Rate..............................................................................8 Times
Sampling Frequency.........................................................................44.1 kHz
Frequency Response............................................................20 Hz to 20 kHz
Total Harmonic Distortion...................................................Less Than 0.05%
Signal to Noise Ratio..............................................................................85 dB
Dynamic Range.......................................................................................85 dB
Channel Separation.................................................................85 dB (1 KHz)
Output Level...................................................................2.0 +/- 0.2V R.M.S.
Power Supply......................................................AC 115/230V, 60/50 Hz

SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITH-

OUT NOTICE FOR PURPOSE OF IMPROVEMENT.