4.0 - PINOUT TABLES
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
- 9 -
- 10 -
- 11 -
- 12 -
- 13 -
- 14 -
- 15 -
- 16 -
- 17 -
- 18 -
- 19 -
- 20 -
-----
YELLOW-BLUE
GREEN-BLUE
-----
GREEN-BROWN
GREEN
BROWN
BLACK
RED
BLACK marked “G”
LIGHT BLUE-GREY
LIGHT BLUE
PINK
GREEN-BLACK
GREEN
BLUE
WHITE-BLACK
YELLOW-BLACK
-----
WHITE-ORANGE
WIRE FUNCTION
POSITION
WIRE COLOR
15A
+
Battery
8A
MAX !
BLACK marked
“M”
GROUND
POSITIVE
BLACK marked
“R”
ORANGE
ORANGE
Output - Turn indicators
BLACK marked “G”
+30
Ignition
BLACK marked “H”
BLACK marked “H”
Engine immobilizer
GREEN
Bonnet switch
TOUCH KEY
5.0 - WIRING DIAGRAM
Connection to
supplied
siren
Before carrying out
electrical connections,
disconnect the battery
negative terminal and
reconnect again after
completion.
!
Red
Black
Green
Brown
4.1 - 20-PIN CONNECTOR
1
5
6
7
2
3
4
8
INSTALLER MANUAL
-----
-----
Door switches - Positive/negative input
Touch key receptacle input
Touch key receptacle ground
LED negative output
LED positive output
Ignition
CAN BUS (CAN-H) signal
CAN BUS (CAN-L) signal
Positive output - System armed (+A)
External sensors negative input
Bonnet switch negative input
Hazard lights or negative outut during alarm (siren,
pager, tracker)
Lock command (1,5 sec.* negative pulse when pressing
remote control button “1” or “3”)
Unlock command (1 sec. negative pulse when pressing
remote control button “2”)
-----
Input for learning and arming/disarming via turn
indicator flashes
System arming confirmation signal
System disarming confirmation signal
Negative input - External sensors
Positive/negative input - Door switches
GREEN-BLACK
GREEN-BROWN
CAN BUS signal
LIGHT BLUE-GREY (CAN-H)
PAGE 08 - INSTALLER MANUAL
INSTALLER MANUAL - PAGE 09
LIGHT BLUE (CAN-L)
Lock command (negative)
Unlock comand (negative)
WHITE-BLACK
YELLOW-BLACK
Positive output -System armed (+A)
PINK
Ground
Siren output
Positive supply
Turn indicators positive output
Engine immobilizer
Siren output
Engine immobilizer
Turn indicators positive output
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
BLACK marked “M”
-----
BLACK marked “R”
ORANGE
BLACK marked “H”
-----
BLACK marked “H”
ORANGE
WIRE FUNCTION
POSITION
WIRE COLOR
4.2 - 8-PIN CONNECTOR
BLUE
Hazard lights or
negative output during alarm
(siren, pager, tracker)
For more complete information regarding connections, refer to the
(
supported vehicle
models
private area).
installation instructions at
www.gemini-alarm.com
* If this function is enabled, the lock/unlock pulse will be
1,5 sec.
0,5 sec. instead of
YELLOW-BLUE
GREEN-BLUE
Input for system operation
via vehicle door
lock motor unit
WHITE-ORANGE
Input for system operation
via turn indicators