Designed
and
manufactured
by
GEMINI
TECHNOLOGIES
srl
‐
Via
L.
Galvani,
12
–
21020
Bodio
Lomnago
(VA)
–
Italy
Tel.
+39
0332
943211
–
Fax
+39
0332
948080
–
www.gemini
‐
alarm.com
ISO
9001
CERTIFIED
COMPANY
Rev.01
07/2018
9/9
*
Presence of human beings, animals or small obstacles or objects/materials with low reflectance might not be detected by the parking system.
FAULTS
CAUSE / SOLUTIONS
The system does not work when reverse gear is
engaged.
Check all connections.
A sound signal goes off when there is no obstacle in
front of the vehicle.
Check that the arrow and the UP indication are pointing upwards.
Ensure that the sensors have been installed at the correct height.
If they read the ground, use the correction adapters to tilt the sensors upwards.
Modify setting.
Sensitivity might be too high. Adjust sensitivity.
Check that there is no excessive paint on the sensor surface. Too much spray paint can impair sensor ability to function
properly.
No warning signals.
Check sensor connections.
False warning signals.
Back part of sensors in contact with frame. Create a separation between the sensors and the vehicle chassis (at least
2mm).
The present device does not fall within the scope of Directive 2002/96EC on Waste Electrical and Electronic Equipment (WEEE) as specified in art. 2.1 of L. D.
No. 151 of 25/07/2005.
Power supply
12 - 24 Vdc
Current consumption
Control unit
39mA
Buzzer 29mA
Operating temperature range
-40°C / +85°C
Ultrasonic frequency
58 kHz
16.0 - TECHNICAL SPECIFICATIONS
14.0 - TROUBLESHOOTING
15.0 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE
