GEMAŞ Genel Mühendislik Mekanik San.veTic.A.Ş.
İTOB Organize Sanayi Bölgesi 10001 Sok.No:28 Menderes/İZMİR TURKEY
Tel:0232 799 0 333 Fax:0232 799 0 330 www.gemas.com.tr
4
ENG
Installation And User Manual RGB Central Control Panel
V1.5
4.SATELLITE OUT Connection
In case the central control panel power is not sufficient for your lighting requirements
(>200W), the power can be increased by using the Satellite panel. The GATE INPUT socket (RGB)
of the satellite board must be connected to the socket specified as SATELLITE
OUT.
5.Pairing Button (REMOTE CONTROL IDENTIFICATION)
The RGB central control panel remote control handset has already been paired at the factory
before despatch. If you get a new remote control handset for any reason; you have to identify/pair
the new remote control handset to the RGB central control panel. During this identification, the
Pairing Button is pressed once. The RF indicator on the panel starts flashing quickly. Now press
button 3 on the remote control and the identification/pairing process is complete.
RF REMOTE AND FUNCTIONS
The RF remote control handset allows the user to operate the system from a distance. Outdoor
network coverage is average 80m . The network coverage should be calculated according to the
ambient condition at a tolerance of +/- 20m.
1-
Switch the lights to the next colour mode/program
2-
Turns the lights on/off
3-
Switch the lights to the previous colour mode/program
4-
Changes the speed of the light colour animations
When the battery on the remote control handset becomes low, the
function selected by the user may not be detected by the RGB Central
Control Panel, even though the LED on the remote control flashes. The
remote control handset batteries should be changed in this situation.
