Page iii
Electromagnetic Compatibility (EMC)
The Products are designed to be immune to levels of interference generated within an office
environment and not to interfere with other equipment. In order to provide this level of
compatibility the Product, its cabling and PSU or its installations, must not be modified in any
way.
Modifications or changes to the Product, the interface cables or the
power supply not expressly approved by the manufacturer could
void the User's authority to operate the Product and/or break local
laws or regulations.
In some situations AC line transients or Electrostatic Discharge may
cause a loss of communication between the document reader and
the host application. If this occurs, it may be necessary to restart the
host application, or unplug and reconnect the USB cable, or power
cycle the document reader in order to restore operation.
For further regulatory information or copies of certificates contact your local Gemalto
representative.
EMC Compliance Europe
The Product meets the following European Council Directives:
Scanner: EMC (2004/108/EC), RFID Option RE&TTE (1999/5/EC)
PSU: EMC (2004/108/EC), LVD (2006/95/EC)
FCC/Canada Radio Frequency Rules and
Regulations
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his/her
own expense.
NO MODIFICATIONS. Modifications to this device shall not be made without the written
consent of Gemalto. Unauthorized modifications may void the authority granted under Federal
Communications Commission Rules permitting the operation of this device.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
