manualshive.com logo in svg

Gemalto Cinterion EMS31-V, Обзор аппаратного интерфейса

Поделиться
Скачать
Gemalto Cinterion EMS31-V Скачать руководство пользователя страница 26

Cinterion

®

 EMS31-V Hardware Interface Overview

5.4 Compliance with FCC and Regulations

27

EMS31_V_HIO_v00.004

2018-02-27

Confidential / Preliminary

Page 26 of 35

5.4

Compliance with FCC and Regulations

The Equipment Authorization Certification for the Gemalto M2M reference application de-
scribed in 

Section 5.3

 will be registered under the following identifiers:

•

EMS31-V:

FCC Identifier: QIPEMS31-V

R1

 

Manufacturers of mobile or fixed devices incorporating EMS31-V modules are authorized to 
use the FCC Grants of the EMS31-V modules for their own final products according to the con-
ditions referenced in these documents. In this case, an FCC label of the module shall be visible 
from the outside, or the host device shall bear a second label stating "Contains FCC ID: 
QIPEMS31-V

R1

". The integration is limited to fixed or mobile categorized host devices, where 

a separation distance between the antenna and any person of min. 20cm can be assured 
during normal operating conditions.

For mobile and fixed operation configurations the antenna gain, including cable loss, must not 
exceed the limits in the following 

Table 13

 for FCC.

IMPORTANT: 
Manufacturers of portable applications incorporating EMS31-V modules are required to have 
their final product certified and apply for their own FCC Grant related to the specific portable 
mobile. This is mandatory to meet the SAR requirements for portable mobiles (see 

Section 5.2

 

for detail).

Changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment.

Note: Manufacturers/OEM Integrators must ensure that the final user documentation does not 
contain any information on how to install or remove the module from the final product.

Table 13:  

Antenna gain limits for FCC

Operating band

FCC limit

Unit

Maximum gain in lower operating bands with f< 1GHz

(LTE Bd13)

8

.4

1

dBi

Maximum gain in higher operating bands with f=1700MHz

(LTE Bd4)

4

.5

dBi

Содержание Cinterion EMS31-V




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды