manualshive.com logo in svg

Gemalto Cinterion EMS31-V, Обзор аппаратного интерфейса

Поделиться
Скачать
Gemalto Cinterion EMS31-V Скачать руководство пользователя страница 16

Cinterion

®

 EMS31-V Hardware Interface Overview

2.2 RF Antenna Interface

18

EMS31_V_HIO_v00.004

2018-02-27

Confidential / Preliminary

Page 16 of 35

2.2.1

Antenna Instalation

The distance between the antenna RF pads and its neighboring GND pads has been optimized 
for best possible impedance. On the application PCB, special attention should be paid to these 
3 pads, in order to prevent mismatch.

The wiring of the antenna connection line, starting from the antenna pad to the application an-
tenna should result in a 50

Ω

 line impedance. Line width and distance to the GND plane needs 

to be optimized with regard to the PCB’s layer stack.

To prevent receiver desensitization due to interferences generated by fast transients like high 
speed clocks on the application PCB, it is recommended to realize the antenna connection line 
using uninterrupted ground plane and embedded Stripline rather than Microstrip line technolo-
gy.

For type approval purposes (i.e., FCC KDB 996369 related to modular approval requirements) 
an external application must connect the RF signal in one of the following ways:

•

Via  50

Ω

 coaxial antenna connector (common connectors are U-FL or SMA) placed as close

as possible to the module's antenna pad.

•

By soldering the antenna to the antenna connection line on the application’s PCB (without
the use of any connector) as close as possible to the module’s antenna pad.

•

By routing the application PCB's antenna to the module’s antenna pad in the shortest way.

Awareness for ESD protection on the RF interfaces should also be considered. This
protection could be utilized through the pi-network above (primarily for managing any
additional RF optimization needs) or by additional component addition in series with the above
pi-network matching.

Содержание Cinterion EMS31-V




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды