Cinterion
®
EMS31-US Hardware Interface Overview
5.4 Compliance with FCC and ISED Rules and Regulations
26
EMS31_US_HIO_v00.103
2017-11-27
Confidential / Preliminary
Page 26 of 33
Notes (FCC):
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any in-
terference, including interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Notes (ISED):
(EN) This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Opera-
tion is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
(FR) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et
RSS-210. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne
doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment
les interférences qui peuvent affecter son fonctionnement.
(EN) Radio frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation, Science and Eco-
nomic Development (ISED) radio frequency exposure limits. The Wireless Device should be
used in such a manner such that the potential for human contact during normal operation is
minimized.
This device has also been evaluated and shown compliant with the ISED RF Exposure limits
under mobile exposure conditions (antennas at least 20cm from a person‘s body).
(FR) Informations concernant l'exposltion aux fréquences radio (RF)
La puissance de sortie émise par l'appareil de sans fiI est inférieure à la limite d'exposition aux
fréquences radio d’Innovation, Sciences et Développement économique Canada (ISDE). Utili-
sez l'appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement nor-
mal.
Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF
d'ISDE dans des conditions d'exposition à des appareils mobiles (les antennes se situent à
moins de 20cm du corps d'une personne).
