Cinterion
®
EMS31-US Hardware Interface Overview
5.4 Compliance with FCC and ISED Rules and Regulations
26
EMS31_US_HIO_v00.103
2017-11-27
Confidential / Preliminary
Page 25 of 33
5.4
Compliance with FCC and ISED Rules and Regulations
The Equipment Authorization Certification for the Gemalto M2M reference application de-
scribed in
Section 5.3
will be registered under the following identifiers:
•
EMS31-US:
FCC Identifier: QIPEMS31-US
Innovation, Science and Economic Development Canada: 7830A-EMS31US
Granted to Gemalto M2M GmbH
Manufacturers of mobile or fixed devices incorporating EMS31-US modules are authorized to
use the FCC Grants and Innovation, Science and Economic Development Certificates of the
EMS31-US modules for their own final products according to the conditions referenced in these
documents. In this case, an FCC/ ISED label of the module shall be visible from the outside, or
the host device shall bear a second label stating "Contains FCC ID: QIPEMS31-US", and ac-
cordingly “Contains IC: 7830A-EMS31US“. The integration is limited to fixed or mobile catego-
rized host devices, where a separation distance between the antenna and any person of min.
20cm can be assured during normal operating conditions.
For mobile and fixed operation configurations the antenna gain, including cable loss, must not
exceed the limits in the following
Table 11
for FCC and ISED.
IMPORTANT:
Manufacturers of portable applications incorporating EMS31-US modules are required to have
their final product certified and apply for their own FCC Grant and Innovation, Science and Eco-
nomic Development Certificate related to the specific portable mobile. This is mandatory to
meet the SAR requirements for portable mobiles (see
Section 5.2
for detail).
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: Manufacturers/OEM Integrators must ensure that the final user documentation does not
contain any information on how to install or remove the module from the final product.
Table 11:
Antenna gain limits for FCC and ISED
Operating band
FCC limit
ISED limit
Unit
Maximum gain in higher operating bands with f=1900MHz
(LTE Bd2)
12.0
8.5
dBi
Maximum gain in higher operating bands with f=1700MHz
(LTE Bd4)
12.0
8.3
dBi
Maximum gain in lower operating bands with f< 1GHz
(LTE Bd12)
8.7
5.6
dBi
