Gemalto Cinterion BGS5T USB, Обзор аппаратного интерфейса

Страница: 26 / 50

Cinterion
®
Java Terminals Hardware Interface Overview
3.6 GPIO Interface
39

EHSxT_BGS5T_HIO_v03 2016-05-26
Confidential / Released
Page 26 of 50
The following Table 13 shows the availablility of the GPIO connector pins for various Java Ter-
minal variants.
Please refer to the respective “AT Command Set“ for details on how to configure the GPIO pins
using AT commands.
Table 13: GPIO connector pin availability and alternate pin functionalities
PIN Signal Comment EHS5T
RS485 EHS6T
USB EHS6T
LAN BGS5T
USB
8-pin connector
1 GPIO6 Configurable via AT command,
also as PWM2 signal
   
2 GPIO7 Configurable via AT command,
also as PWM1 signal
   
3 GPIO8 Configurable via AT command,
also as COUNTER signal
   
4 GPIO11 Configurable via AT command -
 
-
5 GPIO12 Configurable via AT command -
 
-
6 GPIO13 Configurable via AT command -
 
-
7 GPIO22 Configurable via AT command
also as TFSDAI
   
8 GPIO23 Configurable via AT command
also as SCLK
   
12-pin connector
1 VCCref Input supply for level adjust-
ment. E.g., c5Vout for
5V IO operation
   
2 GND
   
3 TXD1 or
SPI_MISO Configurable via AT command,
also as SPI_MISO signal TXD1 TXD1 /
SPI_MISO TXD1 /
SPI_MISO TXD1
4 RXD1 or
SPI_MOSI Configurable via AT command,
also as SPI_MOSI signal RXD1 RXD1 /
SPI_MOSI RXD1 /
SPI_MOSI RXD1
5 CTS1 or
SPI_CS or
A+ CTS1 (RS-232) or
SPI_CS or A+ (for RS-485)
depending on product variant A+
(RS-485) CTS1 /
SPI_CS CTS1 /
SPI_CS CTS1
6 RTS1 or
B- RTS1 (RS-232) or
B- (for RS-485)
depending on product variant B-
(RS-485 RTS1 RTS1 RTS1
7 +5Vout External power supply up to
100mA, usable as VCCref input
   
8 DSR0 or
ADC1_IN or
SPI_CLK Configurable via AT command DSR0 /
ADC1_IN
 
DSR0 /
ADC1_IN
9 I2CDAT I
2
C interface

 

10 I2CCLK I
2
C interface
   
11 GPIO20 Configurable via AT command
also as TXDDAI
   
12 GPIO21 Configurable via AT command
also as RXDDAI
   