V
12/13
38
•
Axes operating modes
OptiMove CR07
4. Press to select the next program step
- Display
A3
shows - - -
5. Select the desired program number using
keys. The
display
A3
shows the program number
6. Repeat the steps 2-5 for further programs
7. Press
the key, in order to exit the setup mode
RAM reset
In the RAM reset mode, all preset values and system parameters are
loaded with default values.
Entering the RAM reset mode
1. Switch off the axis control unit by pressing
2. Keep pressed the
key, and at the same time switch on the
axis control unit with
. Keep pressed the
key for further 10
seconds.
The value
255
appears on the display
A3
, and the LED
L3
blinks.
All other displays remain dark
3. Press
the key, in order to exit the RAM reset mode
Default values after RAM reset
Name
Default value
Preset values
Upper position (m)
0.30
Lower position (m)
0.00
Speed upwards [m/s]
0.20
Speed downwards [m/s]
0.20
System parameters
P1 - Upper stroke limit (also applied as travel position
for horizontal axis)
0.30
P2 - Operating mode
1
P3 - Acceleration [m/s
2
]
1.50
P4 - Max. speed [m/s]
0.60
