manualshive.com logo in svg

Gema OptiMove CR07, Инструкция по эксплуатации и список запасных частей

Поделиться
Скачать
Gema OptiMove CR07 Скачать руководство пользователя страница 30

 V 

12/13 

28  

•

  Operation 

OptiMove CR07 

The blinking LED of the key 

 indicates that reference point 

travel has not been carried out yet. 

2. Press 

the    key 

The control unit starts the reference travel 

3.  At the end of the reference travel, the LED of the 

 key expires 

and the axis is referenced 

NOTE! 

If the axis can collide somewhere, or the guns are incorrectly 

mounted, or the lower reversing point is situated too low, the axis 
can be stopped by pressing the 

 key. By pressing the key again, 

the reference travel will continue. 

The procedure described above relates to the reference point traveling in 
manual operation. In the automatic operation mode, the reference point 
traveling is triggered with ID no. 7 by the DigitalBus, and with the 
corresponding command by the CAN bus. 

Start/stop the axis 

1.  Switch on the axis control unit (see also "Switch on/off the axis 

control unit") 

2.  If necessary, change to another program (see also "Program 

change") 

3. Press 

the   key. 

The axis is started, and the selected program is activated. The 
corresponding LED illuminates 

4. Press 

the   key. 

The axis is stopped 

- The 

display 

A1

 shows the actual axis position. The 

corresponding LED remains unlit 

Содержание OptiMove CR07




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды