Gema OptiFlex 2 B, Руководство по эксплуатации

Страница: 6 / 45

V 03/13
4
•
General safety regulations OptiFlex 2 B
The OptiFlex 2 B Manual coating equipment is built to the latest
specification and conforms to the recognized technical safety regulations.
It is designed for the normal application of powder coating.
Any other use is considered non-compliant. The manufacturer shall not
be liable for damage resulting from any such non-compliant use and the
user shall bear sole responsibility for such actions. Gema Switzerland
GmbH must be consulted prior to any use of the OptiFlex 2 B Manual
coating equipment for purposes or substances beyond those stipulated in
our guidelines.
Observance of the operating, service and maintenance instructions
specified by the manufacturer is also part of the conformity of use.
The relevant accident prevention regulations, as well as other generally
recognized safety regulations, occupational health and structural
regulations are to be observed.
Furthermore, the country-specific safety regulations also must be
observed.
Additional safety and operation notices can be found on the
accompanying CD or on the homepage www.gemapowdercoating.com.
Start-up is forbidden until it has been established that the OptiFlex 2 B
manual coating equipment has been set up and wired according to the
EU guidelines for machinery.
Unauthorized modifications to the OptiFlex 2 B Manual coating
equipment exempt the manufacturer from any liability from resulting
damages or accidents.
The operator must ensure that all users have received appropriate
training for powder spraying equipment and are aware of the possible
sources of danger.
Any operating method, which will negatively influence the technical safety
of the powder spraying equipment, is to be avoided.
General
dangers
General
Information