V
04/17
OptiCenter OC04
Coating operation
•
27
Switching off the OptiCenter OC04 (after each work
day)
NOTE:
Before the equipment can be turned off, the contents of the contain-
er should be emptied into a powder bag. This will prevent the pow-
der from absorbing moisture during the night, which can cause no
or uneven fluidization.
The following steps must be taken to switch off the powder center:
1. Check if all the workpieces have been coated
2. Clean the OptiCenter thoroughly, in order to avoid powder accumula-
tion (see therefore in chapter "Cleaning / Color change")
WARNING:
Empty powder container!
3. Switch off the powder management center at the main switch
−
The interior lighting is no longer lit
