V12/19
iONstream 4.0
User Duties
•
17
Storage, Transport and Packaging/Unpacking
The iONstream system must be packed in the original packaging and
protected against breakage, ingress of water and humidity. Establish the
ambient conditions in accordance with the technical data in this manual.
Caution!
Sharp pins
The emissions pins of the neutralizing bars are extremely sharp and can
cause injury when touched. Check carefully for possible transport
damage. Inform the transporting company immediately about transport
damage. Also inform Gema Switzerland GmbH immediately.
Check the following carefully when unpacking:
–
Quantity delivered
–
Type and model according to label
–
Accessories
–
Correct manual
In case of incorrect deliveries or questions, please contact your local
representative or Gema Switzerland GmbH. Follow local instructions for
package material disposal.
User and working safety prior to commissioning
WARNING
Danger of electric shock
► Always ground by using the ground stud!
Prior to commissioning, ensure that the device ground is connected to the
ground stud as shown in figure 1. The ground wire must have a minimum
cross-section of 2.5 mm² (AWG 13).
fig. 1: Connection to machine or plant mass / ground
The iONstream systems for electrostatic neutralizing must be regularly
checked for mechanical damage as well as for bar contamination. Any
errors must be eliminated prior to switching on the system.
