GEM C67 CleanStar, Инструкция по установке, эксплуатации и обслуживанию для установщика и пользователя

Страница: 21 / 40

C67
Prior to commissioning:
G
Read the installation, operating and
maintenance instructions.
G
Provide adequate training for the
installation and operating personnel.
G
Ensure that the contents of the
installation, operating and maintenance
instructions have been fully understood
by the responsible personnel.
G
De fi ne the areas of responsibility.
During operation:
G
Keep the installation, operating and
maintenance instructions available at the
place of use.
G
Observe the safety information.
G
Use only in accordance with the
speci fi cations.
G
Any servicing work and repairs not
described in the installation, operating
and maintenance instructions must not
be performed without consulting the
manufacturer fi rst.
DANGER
Strictly observe the safety data sheets
or the safety regulations that are valid
for the media used.
In cases of uncertainty:
Consult the nearest GEMÜ sales o ffi ce.
2.2 Warning notes
Wherever possible, warning notes are
organised according to the following
scheme:
SIGNAL WORD
Type and source of the danger
®
Possible consequences of
non-observance.
G
Measures for avoiding danger.
Warning notes are always marked with
a signal word and sometimes also with a
symbol for the specific danger.
The following signal words and danger
levels are used:
DANGER
Imminent danger!
®
Non-observance will lead to death or
severe injury.
WARNING
Potentially dangerous situation!
®
Non-observance can cause death or
severe injury.
CAUTION
Potentially dangerous situation!
®
Non-observance can cause moderate
to light injury.
CAUTION (WITHOUT SYMBOL)
Potentially dangerous situation!
®
Non-observance can cause damage to
property.
2.3 Symbols used
Danger - hot surfaces!
Danger - corrosive materials!
Hand: indicates general information
and recommendations.
G
Bullet point: indicates the tasks to
be performed.
®
Arrow: indicates the response(s) to
tasks.
Enumeration sign
21 / 40