GEM C67 CleanStar, Инструкция по установке, эксплуатации и обслуживанию для установщика и пользователя

Страница: 20 / 40

C67
Correct installation, operation, servicing and
repair work ensure faultless diaphragm valve
operation.
The descriptions and instructions
apply to the standard versions.
For special versions not described
in these installation, operating
and maintenance instructions the
basic information contained herein
applies in combination with any
additional special documentation.
All rights including copyright
and industrial property rights are
expressly reserved.
2 General safety information
The safety information does not take into
account:
Unexpected incidents and events, which
may occur during installation, operation
and servicing.
Local safety regulations which must be
adhered to by the operator and by any
additional installation personnel.
2.1 Information for service
and operating personnel
The installation, operating and maintenance
instructions contain fundamental safety
information that must be observed during
commissioning, operation and servicing.
Non-compliance with these instructions may
cause:
Personal hazard due to electrical,
mechanical and chemical e ff ects.
Hazard to nearby equipment.
Failure of important valve functions.
Hazard to the environment due to the
leakage of dangerous materials.
Hazard to the process purity and / or the
process system safety.
1 General information
Prerequisites to ensure that the GEMÜ valve
functions correctly:
Correct shipping and storage
Installation and commissioning by trained
personnel
Operation according to the installation,
operating and maintenance instructions
Recommended maintenance
Contents
1 General information 20
2 General safety information 20
2.1 Information for service
and operating personnel 20
2.2 Warning notes 21
2.3 Symbols used 21
3 De fi nition of terms 22
4 Intended area of use 22
5 Scope of delivery 22
6 Technical data 22
7 Order data 28
8 Manufacturer’s information 29
8.1 Transport 29
8.2 Delivery and performance 29
8.3 Storage 29
8.4 Tools required 29
8.5 Opening the packaging 29
9 Functional description 30
9.1
Type plate 30
10 Construction 30
11 Installation and operation 31
11.1 Installing the diaphragm valve 31
11.2 Operation 32
11.3 Setting the seal adjuster 33
11.4 Lock out device 34
12 Commissioning 34
13 Inspection and servicing 34
14 Disassembly 35
15 Disposal 35
16 Returns 35
17 Information 36
18 Troubleshooting /
Fault clearance 36
19 EU Declaration of conformity 37
20 / 40