GEM 0322, Руководство по эксплуатации

Страница: 6 / 24

www.gemu-group.com 6 / 24 GEMÜ 0322
5 Correct use
Installing the RFID chip
RFID chip
5 Correct use
DANGER
Danger of explosion
▶ Danger of death or severe injury.
●
Only use the product in potentially ex-
plosive zones confirmed in the declar-
ation of conformity.
WARNING
Improper use of the product!
▶ Risk of severe injury or death.
▶
Manufacturer liability and guarantee will be void.
●
Only use the product in accordance with the operating
conditions specified in the contract documentation and
this document.
1. Use the product in accordance with the technical data.
The GEMÜ 0322 directly controlled 3/2-way pilot solenoid
valve is designed for direct mounting or for modular battery
mounting by using clips. The body is made of plastic. The
coil is plastic encapsulated.
5.1 Product without ATEX, code 02, 03, 06, 08, 09
The product is not intended for use in potentially explosive
areas.
5.2 Product with ATEX, code 01, 04, 05, 07, 11
The product with the ATEX ordering option is intended for
use in potentially explosive areas of zone 2 with gases, mists
or vapours and zone 22 with combustible dusts in accord-
ance with EU directive 2014/34/EU (ATEX).
The product has the following explosion protection marking:
Gas: II 2G Ex mb II T4
Dust: II 2D Ex tD A21 IP65 T130°C
Type examination certificate: PTB 03 ATEX 2018 X
The product has been developed in compliance with the fol-
lowing harmonised standards:
– DIN EN 60079-0:2012+A11:2013
– DIN EN 60079-7:2015
– DIN EN 60079-15:2010
– DIN EN 60079-31:2014
Use of the product is permissible in the following ambient
temperature ranges: 0 to +60 °C
For use in potentially explosive areas, the following
conditions or operation limits must be observed:
The following special conditions must be complied with:
1. Connection cables and connectors must be protected
from damage.
2. Layers of dust > 5 mm must be removed.
3. Warning label "Danger from electrostatic build-up".
4. Warning label "Do not disconnect when live".