Gehl R135, Руководство оператора

Страница: 107 / 206

103 50940193/DP0415
Always carry the loaded bucket with the lift arm in the transport
position. See “Attachment Transport Position” on page 94. For
additional stability when operating on inclines, always travel with the
heavier end of the loader toward the top of the incline.
Make sure you have a good view of the material you are digging, and of
the area you will be working in.
Use extreme care when digging around foundations or walls. Never
remove material that might compromise a wall or foundation.
Never push the “float” button with the bucket or attachment raised,
because this will cause the lift arm to fall.
Follow the recommendations in “Fields of
Application” on page 6.
Digging with a Bucket
1. (Figure 70) Approach the
digging site with the lift arm
slightly raised. Tilt the
bucket forward until the
cutting edge contacts the
ground.
2. Tilt the cutting edge of the
bucket down at an angle
appropriate for ground
hardness.
3. Drive forward slowly,
digging into the ground with
the cutting edge of the bucket
and gradually lower the lift
arm.
4. When the bucket is full, raise
the bucket and tilt it back and
back away from the material.
Always carry the loaded bucket with the lift arm in
the transport position. See “Attachment Transport
Position” on page 94. For additional stability when operating on
inclines, always travel with the heavier end of the loader toward the top
of the incline.
CAUTION
Figure 70 – Digging
1 2
3
4
WARNING