Gehl Dynalift 663, Руководство оператора

Страница: 40 / 72

GENERAL INFORMATION
NOTE:
All Service routines, with the exception of
those described under the “Dealer Services” topic
are owner-operator responsibilities. All Operator
Services described under the hourly subtopics
are also referred to on a decal which is located on
the inside right side panel of the operator’s sta-
tion. Refer to the Lubrication chapter of this man-
ual for lubrication information.
NOTE:
This “Service” chapter describes proce-
dures to follow for making routine maintenance
checks, adjustments and replacements. The
majority of the procedures are also referred to in
the “Maintenance” chapter of this manual. For
engine related adjustments and servicing proce-
dures, be sure to refer to the engine manual pro-
vided.
PRECAUTIONS
DO NOT perform any maintenance or repair without
the owner’s prior authorization. Allow only trained
personnel to service the machine.
WARRANTY repairs can only be done by a GEHL
Dealer. He will know what portions of the machine are
covered under the terms of the GEHL Warranty and
what portions are covered by other vendor OEM war-
ranties.
When a problem occurs, don’t overlook simple causes
such as an empty fuel tank. Check for leaks and broken
connections. Make note of any specific problem symp-
toms, noises, etc. and contact your local Gehl Dealer.
IMPORTANT:
Always dispose of waste lubri-
cating oils, anti-freeze and hydraulic fluids
according to local regulations or take them to a
recycling center for disposal. DO NOT pour them
onto the ground or into a drain.
DEALER SERVICES
The following areas of internal components service,
replacement and operating adjustments should only be
attempted by (or under the direction of) an authorized
GEHL Telescopic Forklift Dealer.
IMPORTANT:
DO NOT attempt to service or
repair major components, unless authorized to do
so by your Gehl Dealer. Any unauthorized repair
will void the warranty.
POWER TRAIN COMPONENTS
The engine and transmission are coupled directly to
each other. All service routines, related to the internal
components are precise and critical to proper power
train operation. The axle differential and planetary
ends are also sophisticated assemblies which require
special know-how and tools for servicing.
NOTE:
If any power train components are sus-
pected of faulty operation, contact your Gehl
Dealer for further assistance.
HYDRAULIC SYSTEM COMPONENTS
Valves, pumps, motors and cylinders are also sophisti-
cated assemblies which require special know-how and
tools for servicing. All cylinders are appropriately
designed with particular strokes, diameters, checks and
hose connection provisions unique to the machine
application requirements. A schematic (located at the
end of this manual) can be used as a guide for service
reference, as required.
Chapter 8
SERVICE & STORAGE
WARNING
BEFORE servicing the Telescopic Forklift,
unless expressly instructed to the contrary,
exercise the MANDATORY SAFETY SHUT-
DOWN PROCEDURE
(Safety chapter, p.10) .
After service has been performed, BE SURE to
restore all guards, shields and covers to their
original positions BEFORE resuming machine
operation.
907879/AP1198
38
PRINTED IN U.S.A.
Courtesy of CraneMarket.com