Printed in U.S.A.
4-2
918070/FP0811
Maintenance Safety
•
Never service the machine without reading the
applicable instructions.
•
Always lower bucket and dozer blade to the
ground before performing any maintenance.
•
Use correct procedures to lift and support the
machine. Always lift the blade fully before
installing jackstands.
•
Keep engine cover and hydraulic valve cover
closed except for service. Close and latch cov-
ers before operating the machine.
•
Be sure to have area properly ventilated when
grinding or welding parts. Wear a dust mask.
•
Exhaust fumes can kill. Exhaust system must
be tightly sealed. If working in an enclosed
area, vent exhaust to outside when engine must
be run for service.
•
Never modify equipment or add unapproved
attachments.
•
Before checking fluid levels, stop engine and
let cool, and then clean any flammable materi-
als from the engine and engine compartment.
•
Never service or adjust machine with the
engine running unless the service procedure
requires it.
•
Avoid contact with leaking hydraulic fluid and
diesel fuel under pressure, which can penetrate
the skin and eyes. NEVER use your hands to
search for hydraulic fluid leaks; use a piece of
paper or cardboard. Escaping fluid under pres-
sure can be invisible and can penetrate skin
and cause serious injury. If any fluid is injected
into your skin, get immediate medical atten-
tion. Injected fluid MUST be surgically
removed or gangrene may result.
•
Never fill fuel tank with engine running, while
smoking or when near open flame.
•
Wipe up fuel spills immediately.
•
Keep body, jewelry and clothing away from
moving parts, electrical contacts, hot parts and
exhaust.
•
Wear eye protection when servicing the
machine.
•
Lead-acid batteries produce flammable and
explosive gas. Keep arcs, sparks, flames and
lighted tobacco away from batteries.
•
Batteries contain acid, which burns eyes and
skin on contact. Wear protective clothing. If
acid contacts body, flush well with water. For
eye contact, flush well with water and get
immediate medical attention.
Содержание 503Z
