Gehl 503Z, Руководство оператора

Страница: 54 / 132

Printed in U.S.A. 3-8 918070/FP0811
Pos.
Description
30 Hydraulic oil filter indicator (red) – Hydraulic oil filter indicator light comes on when hydraulic oil filter is too restricted.
31 Air filter indicator (red) – Air filter indicator light comes on when air filter is too dirty.
32 Battery charge fault indicator (red) – Battery charge indicator light comes on when the ignition is turned on and goes off when the engine
starts. If the indicator light comes on while the engine is running, the battery is not charging, indicating a faulty charging circuit in the alterna-
tor or problems with the V-belt. NOTE: a faulty V-belt affects cooling pump operation, which can lead to overheating and more serious engine
problems. Shut off the engine IMMEDIATELY and determine the cause if this indicator comes on when the engine is running.
33 Engine oil pressure indicator (red) – Engine oil pressure light comes on when the ignition is turned on, and goes out when the engine
starts. During normal operation, this indicator should remain off. The indicator will light if the engine oil pressure drops too low. If this occurs,
shut the engine off IMMEDIATELY and determine the cause of the pressure drop.
34 Coolant temperature indicator (red) – Coolant temperature indicator light comes on when coolant temperature is too high.
35 Glow plug indicator (yellow) – Glow plug indicator light comes on when the ignition key is in the glow plug activation position. Indicator will
go out when the glow plugs have heated sufficiently to start the engine.
36 Hourmeter – Indicates the total operating hours of the machine. Use the hourmeter to track maintenance in the maintenance log.
37 Fuel level gauge – The fuel level gauge shows the amount of fuel in the tank.
38 Indicator light – Not assigned.
39 Hydraulic oil temperature indicator light – Hydraulic oil temperature indicator light comes on when hydraulic oil is too hot.
40 Coolant temperature gauge – Displays coolant temperature.
41 High-speed switch (transport speed) – Pressing the switch will enable high travel speed.
42 Windshield wiper switch (cab models only) – Pressing the two-position switch to the first position turns on the windshield wiper. Pressing
and holding the switch in the second position activates the washer fluid pump.
43 Work light switch – Press switch to the ON position to turn on the boom work light.
44 Roof lights (option) – Press switch to the ON position to turn on the roof light lights.
45 Rotating beacon (option) – Press switch to the ON position to turn on the rotating beacon.
46 Ventilation fan (two-speed) – Press the two-position switch to turn on the ventilation fan. Pressing switch to the first position is the low fan
speed position, and the second position is the high fan speed position. If the Summer/Winter operation valve is OPEN (HEATING position),
this switch will function as the cab heater ON/OFF switch. The Summer/Winter operation valve is located under the hood on top of the engine
behind the radiator.
47 Air conditioning (option) – Press the switch to turn on the air conditioning.
48 Proportional control status indicator (option) – One flash indicates precision mode; two flashes indicate power mode.
49 Not assigned
50 High-speed indicator (option) – Indicates high-speed is enabled.
51 Engine error indicator – Indicates a “check engine” condition. See page 5-6.
52 Auto-idle switch (option) – Enables optional auto-idle feature. See page 3-19.