manualshive.com logo in svg

Gehl 503Z, Руководство оператора

Поделиться
Скачать
Gehl 503Z Скачать руководство пользователя страница 67

918070/FP0811

3-21

Printed in U.S.A.

Seat Belt

Make sure the seat belt is not twisted when it is 
fastened, and that it is fastened over the hips and not 
the stomach.

Fasten the seat belt tightly and securely. Remove hard, 
edged or fragile objects from your pockets or clothes 
that might lie between the seatbelt and your body.

Fastening/Unfastening the Seat Belt

Fasten the seat belt around your hips and waist and 
insert tab (A, Figure 3-24) into buckle (B) until it clicks 
securely in place. Slack in the seat belt should 
automatically retract into seat belt spool (D).

Unfasten the seat belt by pressing button (C).

Figure 3-24 Seat Belt

Ventilation

Windshield – Optional Cab

The windshield can be opened for ventilation. Squeeze/
turn latches (1, Figure 3-25) located at the upper cor-
ners of the windshield. Grasp the handles (2) and pull
the windshield up until the latches lock in the open
position. 

Serial Numbers AJ02993 and Up

The windshield can opened for ventilation. Squeeze
latches (1, Figure 3-25) located at the upper corners of
the windshield, pull/push the top of the windshield
backwards/forward and release latches. Pull/push the
top of the window until the catch locks the top of the
windshield securely in place.

To close the windshield, squeeze/turn the latches and
then lower the windshield. Lock the latches in the
closed position.

For additional ventilation, the lower portion of the
windshield can be removed and securely stored in the
glass holder (3) located on the rear window.

WARNING

ALWAYS fasten the seat belt securely and
properly. Never operate the machine with-
out the seat belt fastened around the opera-
tor.

Keep the seat belt clean because dirt can
impair seat belt operation. Check seat belt
condition regularly and have damaged or
worn belts immediately repaired by an
authorized workshop.

After an accident the seat belt strap is
stretched and must be replaced with a new
strap installed by an authorized workshop. 

D

C

A

B

WARNING

Never use ether starting aids. Glow plugs
are used for cold weather starting. The glow
plug can cause ether or other starting fluid
to detonate, causing injury. 

CAUTION

When the windshield is opened, be sure
both latches are locked. When closing the
windshield, keep hands on the handles and
away from path of the windshield.

CAUTION

Support the windshield when releasing it
from the ceiling catches to avoid possible
head injury.

Содержание 503Z





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды