GEHA top secret 390, Руководство по эксплуатации

Страница: 10 / 51

10
1003
Geha top secret 390
english
8 Technical data
* Geha-speci fi cation
Cutting type Strip cut Cross cut
Shred size ( mm) 5.8 3.9 3.9 x 40 1.9 x 15 0.78 x 11 1 x 5
Sa fe ty ra ting German DIN 32757 – 1 2 2 3 4 5 Level 6*
Cutting ca pa ci ty (Sheet), DIN A4 70 g/m
2
80 g/m 2
40 - 42
33 - 35 31 - 33
25 - 27 25 - 27
20 - 22 17 - 19
13 - 15 10 - 11
7 - 9
7 - 8
6 - 7
Cutting speed 126 mm/s 135 mm/s
Weight 48 kg 56 - 58 kg
Noise level (Idle running/ load)
60 dB(A)/60-70 dB(A)
60 dB(A) / 70 - 80 dB(A)
Lo ading width 400 mm
Voltage 230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
Power for the maximum number of sheets 1400 W
Operating mode Continuous operation
Dimensions W x D x H (mm) 595 x 510 x 915
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL) -10 °C to +40 °C
max. 90 %, without condensation
max. 2,000 m
Volume of shredded material bag 148 l
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG , Austrasse 1 - 9, D-88699 Frickingen hereby declares that the machine,
referred to here as
document shredder
Geha top secret 390
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Machinery directive 2006 / 42 / EC
EMC directive 2004 / 108 / EC
Authorised represenatative for the compilation of technical documentation:
Rolf Gasteier, HSM GmbH + Co. KG
Frickingen, 01.03.2010
Rolf
Gasteier - Technical Director
The machine type was tested for compliance with the requirements of the EU Machinery Directive by: the test and cer-
ti
fi cation board of the Technical Administation Committee, c/o Verwaltungs-Berufsgenossenschaft, Deelbögenkamp 4,
D-22297 Hamburg, Germany.
This test centre is responsible in accordance with Appendix XI of the EC Machinery Directive.
Applied standards and technical speci fi cations:
• EN 55014-1:2006 • EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 61000-3-2:2006 • EN 61000-4-4:1995 + A1:2001 + A2:2001
• EN 61000-3-3:1995 + A1:2001 + A2:2005 • EN 61000-4-5:1995 + A1:2001
• EN 55014-2:1997 + A1:2001 • EN 61000-4-6:1996 + A1:2001
• EN 13849-1 • EN 61000-4-11:1994 + A1:2001
• EN 60950-1:2006