GEHA Home & Office X5, Руководство пользователя

Страница: 7 / 48

7
INTRODUCTION
Thank you for choosing this Geha quality product. Before using the device for the first time,
carefully read this manual. Please pay special attention to the safety instructions.
IMPORTANT SAFETY NOTES
Before using the document shredder for the first time, please read the operating instructions.
When operating an electrical device, you should always take basic safety measures to eliminate
the risk of injury from electric shock. Therefore please follow the following basic rules.
1. When the shredder is not in operation, before emptying the bin, clearing a paper jam
or cleaning the device, always disconnect its plug from the power mains.
2. Proceed with extreme care when operating the shredder near children or people with
an intellectual disability!
3. Protect yourself against damage from electric shock. Never immerse the power cord,
the power plug or the device in water or any other liquid.
4. Do not operate the device in the vicinity of water
(shredder suitable only for use in dry rooms).
5. Never insert metal objects, jewellery, hair, fingers, cloths, etc. into the paper feeder
of the shredder.
6. Before shredding a document, remove paper clips and staples.
7. Regularly empty the paper bin to prevent paper jams.
8. Do not switch on the device if its plug or power cord is damaged or if the shredder does
not work properly or is otherwise damaged.
9. In the event of an emergency, disconnect the shredder from the power supply
by pulling the plug.
10. Where possible, install the device near a power socket and ensure that the socket
remains freely accessible.
11. Do not clean the shredder with cloth or detergents containing aerosols or solvents.
12. Do not spray the device with liquids. Do not treat with oil spray.
INSTALLING SHREDDER
1. Operate the device only if it stands on a level floor.
2. Check the cutting unit to ensure that it is properly placed on the bin.
The shredder is equipped with a safety switch interrupting the power supply as soon
as the cutting unit is removed from the bin or when it is not correctly placed on it.
3. Insert the plug of the power cord into a standard power socket.
Manual__X5Basic:Layout 1 07.09.10 16:36 Seite 7