54
English
Appendices
Image is out of focus
Make sure the lens cap is removed.
Adjust the Focus Ring on the projector lens.
Make sure the projection screen is between the required distance
3.28 to 32.8 feet (.0 to 0.0 meters) from the projector.
See page 8.
The image is stretched when displaying 6:9 DVD title
When you play anamorphic DVD or 6:9 DVD, the projector will
show the best image when the projector display mode is set to
6:9 in the OSD.
If you play the LBX format DVD title, please change the format as
LBX in projector OSD
If you play 4:3 format DVD titles, please change the format to 4:3
in the projector OSD.
If the image is still stretched, you will also need to adjust the
aspect ratio by referring to the following:
Please setup the display format as 6:9 (wide) aspect ratio type
on your DVD player.
Image is too small or too large
Adjust the Zoom Ring on the top of the projector.
Move the projector closer to or further from the screen.
Press
“MENU” button on the remote control or projector panel, go
to “Display
Format” and try the different settings.
Image has slanted sides
If possible, reposition the projector so that it is horizontally
centered on the screen and below the bottom of the screen.
Press “KE/-” button on the remote control or press “
/
” on the projector panel, until the sides are vertical.
Image is reversed
Select “SETUP
Projection” from the OSD and adjust the
projection direction.
Use of Keystone is
not recommended.
Содержание C223
Страница 26: ...26 English User Controls...
