gefran RADIUS, Руководство по установке и эксплуатации, Страница: 17 / 20

Radius Log Light
17
6. Q&A
1) Why my RADIUS Log Light can not connect to inverter (with Bluetooth module)?
1. Encryption password (pair code) is different. Check Bluetooth module’s encryption password by
“Bluetooth RS232 Configuration”. ENTER “Set BT code” interface and inquiry RADIUS Log Light
module’s password. Check and correct it to the same.
2. Bluetooth module is in parameter setting mode (the 2 Bluetooth indicator lights all dark). Press the
small button to allow module run in communication mode (the 2 indicator lights all blink).
3. If problem still exist, entry “Reset COMM” interface and reset RADIUS Log Light module.
2) Why RADIUS Log Light can’t write data to SD card?
1. There is a write LOCK switch in the side of SD card. Check if SD card have been locked, switch
LOCK to another side.
2. Check your Bluetooth module number has been set correct. You must set it to actual Bluetooth
number used.