gefran RADIUS, Руководство по установке и эксплуатации, Страница: 15 / 20

Radius Log Light
15
5. Introduction to Bluetooth module setting
Bluetooth module is a hardware device insert to inverter’s RS232 port. Bluetooth RS232 Configuration is a pa-
rameter setting software for Bluetooth module. It can set Bluetooth module device name, flow control method,
Bluetooth encryption password (pair code), etc.
5.1 Main interface of Bluetooth RS232 Configuration
Fig 5.1 Bluetooth RS232 Configuration main interface
Port Num: Serial port number of computer
Flow Control: Select None
Device Name: Bluetooth name display on RADIUS Log Light
Baud rate: Default baud rate is 9600 baud.
Class of Device: The communication pair of Bluetooth must have a same class code. If not, set master
device to ox000000, then slave device can set to any you like.
Master: Set as a master device. If devices communicate via Bluetooth, it required one is master
device, the other one slave. Bluetooth modules are working as a slave device.
Encryption: If ticked, the pair devices must use password to communicate with each other, data trans-
ferred will encrypt as well.
Bind Addr: Bind address, whether bind to a pair device. If ticked, Bluetooth module can not be con-
nected by other Bluetooth device any more. If not ticked, it can connect by any Bluetooth
device.
Bound BD Addr: Inquire bound address by click “Search Device”
Clear:
Clear Bluetooth pair address saved before. When connected to another address, Bluetooth
module saved it address. That hold back other Bluetooth devices’ connect attempt. By do-
ing the clear operation, the module can connect to other devices again.