
12
Radius Log Light
(1)
“UP”: select Year, Month, Data, Hour, Minute optional; “DOWN”: adjust value; “ENTER”: confirm and save.
(2)
Role Num: set Bluetooth device number. “ESC” restart.
(3)
“UP”: select password digit, (4 digit password); “DOWN”: adjust value; “Enter”: confirm setting.
(4)
“ESC” restart Log Light.
Fig 3.5 Set Table interface and its sub interface
1) Press “
ENTER
” button after selected “SetTime” option to set year, month, day, hour, minute. Select
one to
ENTER
then press “
UP
” to move the cursor, and “
DOWN
” to increase the value.
2) Press “
ENTER
” in SetUSB option open the USB function, that allow computer reading SD card data
from USB port. Press “ESC” to shutdown USB port.
3) Press “
ENTER
” button on “SetComm” option to set Bluetooth module number. You must set Blue-
tooth module number in SetComm option before use RADIUS Log Light. Press
UP
button to increase
the number and
DOWN
to decrease the number. The Bluetooth module number must be set first, or
there might be monitoring data lost. Press
ENTER
to reset RADIUS Log Light. Then press ESC to
exit, and RADIUS Log Light will restart and connect to inverters.
4) Press “
ENTER
” button on “Set BT code” selected to set bluetooth pair code (encryption password),
after set finished, press “ESC” to restart RADIUS Log Light.
Содержание RADIUS
Страница 1: ... Installation operation manual RADIUS Log Light Data logger for plant monitoring ...
Страница 4: ...4 Radius Log Light ...
Страница 18: ......
Страница 19: ......