gefran KFM LD, Инструкция по эксплуатации

Страница: 35 / 40

Error
no.:
H1
green
H2
yellow
H3
green
Description of reason for abort Possible cause
83 - * - Same as 82, but learning the force to close the
door > Same as 82
84 0 * - Timeout (25 sec) when opening the door, to door
position 5 cm before "door open" > Belt tension too weak (belt slippage)
85 - * 0 Same as 83, but 5 cm before the position "door
open" > Same as 82
86 0 * 0 Same as 83, but 5 cm before the position "door
open" > Same as 82
87 - - The required torque is too large when learning the
force to open the cam > Cam blocked, incorrect cam path learned.
88 - - The required torque is too large when learning the
force to close the cam > Cam blocked, incorrect cam path learned.
89 - Timeout (5 sec) on opening the cam, before learn-
ing the door mass > Cam or landing door lock jammed
90 0 - Timeout (5 sec) until constant rpm was reached to
learn the door mass > Currently no known cause
91 - 0 Learning the door mass cancelled, as braking
distance not adequate (position 60% opened) > Currently no known cause
92 0 Necessary starting speed to learn the door mass-
was not reached > Frictional forces too high
> Door blocked
93 - Braking distance was too short to learn the door
mass (less than ½ motor revolution) > Same as 92
94 - Learned door mass too large > Incorrect reduction ratio or door mass too large
(hardware)
> Incorrect gear ratio aipm (impulses per cm of
path)
95 Learned door mass too small > Error when learning the impulses per cm of path
(aipm)
Error when learning the impulses per cm of path (aipm)
96 - - - Learned reduction ratio outside the limits:
60 ≤ aipm ≤ 310) impulses/cm
> The specified door path was not maintained
when closing the door.
Tab. 29 Error messages during automatic commissioning. LED H4 continuously flashes in red.
5.5.2. Explanation of the LED indicators
- off LED does not light up
0 on LED lights up
* Flashing Short-duration blinking
Blinks LED blinks
1 blinks 2 blinks The two diodes blink in an alternating rhythm (1 on / 2 off); (2 on / 1 off);…
2 blinks 2 blinks The two diodes blink with the same rhythm (1 and 2 simultaneously on or off)
1 blinks 2 blinks 2 blinks LED 1 blinks in an alternating rhythm with LED 2 and LED 3 (1 on, 2 and 3 off); (1 off, 2 and 3 on)
Tab. 30 Explanation of the LED indicators
Still corresponds to the display from the previous normal door operation (user defined).
KFM LD • Instruction manual
35