23
RS232 Settings
Bits per second ................................................................................................. 19200
Data bits .................................................................................................................... 8
Parity .................................................................................................................. None
Stop bits .....................................................................................................................1
Flow Control ....................................................................................................... None
Command
Code
Response
Description
POWER 0
> POWER OFF
POWER OFF
POWER 1
> POWER ON
POWER ON
VOL +10~-60
> VOL +10~-60
Audio volume adjust from maximum to minimum
MODE 0
> PL II
Audio FAV PROC setup to Dolby Pro Logic II mode
MODE 1
> DIRECT
Audio FAV PROC setup to DIRECT mode
[Defaut:DIRECT]
MODE 2
> STEREO
Audio FAV PROC setup to STEREO mode
MODE 3
> MCH
Audio FAV PROC setup to MCH mode
MODE 4
> MONO
Audio FAV PROC setup to MONO mode
ENHA 0
> ENHA NIGHT+
Audio ENHANCE effect NIGHT+
ENHA 1
> ENHA VOICE+
Audio ENHANCE effect VOICE+
ENHA 2
> ENHA
Audio ENHANCE effect
ENHA 3
> ENHA OFF
Audio ENHANCE effect OFF [Defaut:OFF]
TESTN 0
> NOISE FL
Generate pink noise for adjusting the Front Left
speaker Audio volume
TESTN 1
> NOISE CEN
Generate pink noise for adjusting the Center speaker
Audio volume
TESTN 2
> NOISE FR
Generate pink noise for adjusting the Front Right
speaker Audio volume
TESTN 3
> NOISE SR
Generate pink noise for adjusting the Surround Right
speaker Audio volume
TESTN 4
> NOISE SL
Generate pink noise for adjusting the Surround Left
speaker Audio volume
1 2 3 4 5
6 7 8 9
1 2 3 4 5
6 7 8 9
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
RS-232 SERIAL CONTROL INTERFACE
