Gefen ToolBox GTB-HD4K2K-642-BLK Скачать руководство пользователя страница 28

Страница: 28 / 122

page | 18

The 6x2 Matrix for HDMI 4K x 2K features EDID Management. Before the source can

send video and/or audio to the display (sink), the source reads the EDID (Extended Display

Identification Data) from the display (sink) devices connected to the splitter. The EDID

contains information about what type of audio/video data that the source can send to each

output device. The splitter can use either the downstream EDID (from the display/sink) or

the built-in internal EDID.

Available Modes

•

Internal EDID

Use this EDID mode if problems are encountered when using the external EDID.

The built-in internal EDID provides the source device with a “generic” EDID which

can be used by all display (sink) devices.

•

External EDID

When set to

Ext

mode, EDID data will be fetched from each display (or other sink

device) that is connected to the outputs of the matrix. Once this information is

gathered, the matrix “builds” an EDID based on the highest video and audio formats

that are supported by both

sink devices. This EDID is then transmitted to each source

device.

•

Custom EDID

When set to Custom mode, the matrix will use a customized EDID configuration

selected by the user. For example, each input can be individually set to different

EDID modes to suit the needs of each input.

Selecting the EDID Mode

1. Use a paper clip or other pointed object to press and release the recessed

EDID

button, to toggle between internal, external, and custom EDID modes.

The LED indicator will display the current EDID mode.

EDID Modes

Operating the 6x2 Matrix for HDMI 4K x 2K

Press the

EDID

button to

switch the EDID mode

Содержание ToolBox GTB-HD4K2K-642-BLK



























































































































Результаты поиска

Содержание ToolBox GTB-HD4K2K-642-BLK

Отзывы:

Похожие инструкции для ToolBox GTB-HD4K2K-642-BLK

Бренды по названию

Популярные бренды

Gefen ToolBox GTB-HD4K2K-642-BLK, Руководство пользователя

Результаты поиска

Содержание ToolBox GTB-HD4K2K-642-BLK

Отзывы:

Похожие инструкции для ToolBox GTB-HD4K2K-642-BLK

Бренды по названию

Популярные бренды