Gefen GTB-HDFST-848, Руководство пользователя

Страница: 30 / 64

26
RS-232 SERIAL CONTROL
RS232 Settings
Bits per second ................................................................................................. 19200
Data bits .................................................................................................................... 8
Parity .................................................................................................................. None
Stop bits .....................................................................................................................1
Flow Control ....................................................................................................... None
5 4 3 2 1
9 8 7 6
1 2 3 4 5
6 7 8 9
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
IMPORTANT: When sending RS-232 commands, a carriage return
and a line feed character must be included at the end of each line.
Commands and parameters are not case-sensitive. t
NOTE: When the matrix is locked, routing and “set”-type commands
will not function. The #lock_matrix command must be used before
issuing any commands within this class. See page 39 for details.