Gefen GEF-UHD-89-HBT2, Руководство пользователя, Страница: 102 / 232

page | 90
B
asic Oper
ation
The Web Interface
► Masking Outputs
1. Click the
Routing
tab.
2. Mask the desired output by clicking the Mask button. The Mask button will
turn red, indicating that the selected output is masked.
3. To unmask the output, click the Mask button again. The button will turn black.
► Masking Outputs vs Turning-off Inputs
It is important to distinguish between “masking” an output and “turning off” and input:
► T urning-off an input
When an input is “turned-off”, the signal is “blocked” at the source. This has
the effect of “masking” all outputs to which each input is routed. For example,
if Input 02 is routed to Output A , Output B , and Output C , then “turning-off”
Input 02 will prevent the A/V signal from being displayed on Output A ,
Output B , and Output C .
► M asking (output)
When an output is masked, the signal is “blocked” at the specified output(s).
For example, if
Input 02
is routed to
Output A
,
Output B
, and
Output C
, then
masking Output B , will only block the A/V signal to Output B . Output A and
Output C will remain unaffected.
B
asic Oper
ation