Gefen EXT-HDMI1.3-444, Руководство пользователя

Страница: 25 / 36

The 4x4 Matrix for HDMI 1.3 features EDID Management. Before the source can send
video and/or audio to the display (sink), the source reads the EDID (Extended Display
Identification Data) from the sink (display) devices that are connected to the matrix.
The EDID contains information about what type of audio/video data that the source can
send to each output device. The matrix can use either the downstream EDID (from the
display / sink) or the built-in internal EDID.
Selecting the EDID Mode
1. Use a sharp pointed object, such as a jeweler’s screwdriver, to slide the EDID switch
to the desired position.
► Set the switch to the
Int
position (shown below) to use the built-in internal EDID.
► Set the switch to the
Ext
position to use the external (downstream) EDID.
2. After the desired EDID mode is selected, press the Reset button on the front panel.
The matrix must be reset or power-cycled when switching between EDID modes.
page | 15
Back Panel
Front Panel
EDID Management
Operating the 4x4 Matrix for HDMI 1.3
Reset button