Gefen EXT-HDMI1.3-444, Руководство пользователя

Страница: 23 / 36

page | 13
Using the IR Remote Control Unit
The IR remote control unit provides discrete routing between each input and output.
There are a total of 16 buttons on the IR remote. The buttons are color-coded in groups of
four, which match each group of four LED indicators on the front panel. Each set of buttons
controls the routing for each output. Buttons 1 - 4 select which input (
In 1
-
In 4
) is routed
to Out 1 , buttons 5 - 8 select which input ( In 1 - In 4 ) is routed to Out 2 , and so on.
Let’s look at an example.
Currently, In 2 is routed to Out 2 . To illustrate a routing change, we will route In 3 to Out 2 .
1. Point the IR remote at the IR sensor on the top panel of the matrix.
2. Since we want to switch to a different input source on Out 2 , we need to use the
second set of four buttons (light orange) on the IR remote control. Press button 7,
within this group, to switch to
In 3
to
Out 2
.
3. The LED indicator on the IR remote will flash bright yellow, indicating that one of the
buttons was pressed.
4. The LED indicator for In 3 will glow bright blue, indicating that the input has been
routed to Out 2 (shown above).
Operating the 4x4 Matrix for HDMI 1.3
Routing Basics
LED indicates a
button was pressed
Press button 7
IR sensor
Input 3 selected