Gefen EXT-CAT5-1600A, Руководство пользователя, Страница: 4 / 17

1
INTRODUCTION
Congratulations on your purchase of the CAT5-1600A Extender. Your complete
satisfaction is very important to us.
Gefen
Gefen is a unique product line catering to the growing needs for innovative home
theater solutions. We specialize in total integration for your home theater, while
also focusing on going above and beyond customer expectations to ensure you
get the most from your hardware. We invite you to explore our distinct product
line and hope you fi nd your solutions. Please call us so we can better assist you
with your particular needs.
The Gefen CAT5-1600A Extender
The Gefen CAT5 1600A extends VGA and Audio up to 1000 feet (300 meters)
and USB up to 330 feet (100 meters) using CAT-5 cables. Display resolutions
up to 1920x1200@60Hz are supported. A local monitor can be connected to the
Sender Unit and up to two monitors can be connected to the Receiver Unit. Four
USB connectors on the Receiver Unit allow control of the computer system from
the KVM workstation. Mini-stereo connectors provide for the connection and the
extension of audio devices.
How It Works
Place the CAT5 1600A Sender Unit next to the VGA source. Use the included
VGA cable to connect the source to the Sender Unit. Optionally connect a local
monitor to the Sender Unit using a VGA cable. Connect up to two monitors to the
Receiver Unit with VGA cables. Connect the USB devices to the input and output
connectors. For audio, connect a mini-stereo cable between the audio source
and the audio input on the Sender Unit. Connect a mini-stereo cable between
the audio output on the Receiver Unit and the audio device. Use two CAT-5
cables to connect the Sender Unit to the Receiver Unit. VGA and Audio can be
extended to 1000 feet (300 meters). USB is extended over a separate CAT-5
cable up to 330 feet (100 meters). Connect the included locking power supplies
to both the Sender Unit and Receiver Unit then connect both power cables to
available electrical outlets. The computer can now be controlled from the KVM
workstation.