CONNECTING AND OPERATING THE 3GSDI TO HDMI 1.3 SCALER
Contains options such as OSD Language (English or French) and Scaler confi guration:
General Options
Utilizing the On-Screen Display (OSD) Menu
To access the 3GSDI to HDMI 1.3 Scaler OSD menu, it must be connected to an HDMI-
compliant video display device using an HDMI cable. Push the MENU button on the IR
Remote to make the OSD menu appear or disappear. When fi rst activated, the initial OSD
screen shows the software revision and the remote channel number. The following sections
(up to page 24) cover all of the options which are available from the OSD menu.
Save Confi guration
From here you can save the Scaler’s confi guration to be restored at the next power
up, or alternately restore the default factory confi guration. When restoring the factory
confi guration, please note that you will overwrite any saved confi guration. In a situatioin
where the Scaler has locked up or is malfunctioning and the OSD is not visible, the Scaler
may be restored to factory default settings by pressing the LEFT, RIGHT, and OK buttons
in sequence on the IR Remote Control. Please note that this operation will erase user-
created saved confi gurations.
Figure 2 - On-Screen Display
Figure 3 - Language & Confi guration
13
