manualshive.com logo in svg

Gefen EXT-3GSDI-2-HDMI1.3S, Руководство пользователя

Поделиться
Скачать
Gefen EXT-3GSDI-2-HDMI1.3S Скачать руководство пользователя страница 10

Operation of the Scaler is done by IR Remote Control (Gefen part no. EXT-RMT-8HDS-IR, 
provided with the 3GSDI to HDMI 1.3 Scaler). The remote control has directional buttons to 
navigate within the On-Screen Display (OSD) menu system that drives the Scaler.

7

RMT-8HDS-IR REMOTE DESCRIPTION

3

1

1.    LED indicator - lights up whenever a key is pressed, confi rming transmission 

of IR commands to the Scaler. 

2.  The ENTER button activates a selected menu option in the OSD.

3.  LEFT direction key for menu navigation within the OSD.

4.  DOWN direction key for menu navigation within the OSD.

5.  Source - Cycles between available input sources. The selectable inputs are 

3GSDI Input 1 and 3GSDI Input 2. Press once for Input 1; twice for Input 2. 

6. 

Output - Cycles through the available output resolutions. Please see the section 
“Output Resolutions” on page 11 for the table of output resolutions.

7.  Menu - Displays the OSD menu system for control of the Scaler.

8.  RIGHT direction key for menu navigation within the OSD.

9.  UP direction key for menu navigation within the OSD. 

4

6

2

5

9

8

7

Содержание EXT-3GSDI-2-HDMI1.3S






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды