7
RECEIVER PANEL DESCRIPTIONS
1
DDC Lock LED
When this LED is lit, the quality of the data transmission between Sender and
Receiver is stable. The HDCP copy-protection signal is being passed from the
host computer to the remote Display, allowing the viewing of protected source
content (Blu-ray discs and movies for instance).
2 HPD
LED
This LED shows the status of the Hot Plug Detect signal being sensed at the
Receiver. When this LED is lit, a DVI-compliant display device is connected to
the Receiver and operating properly.
3 Power
LED
When this LED is lit, power is correctly supplied to the unit.
4 USB
Outputs
Connect the keyboard, mouse, printer and any USB-compatible accessories
(such as an external hard disk drive) to these ports.
5
CAT-5 USB Link Input
Connects to the Receiver unit via a length of CAT-5 cabling. Used for
transmission of the USB signal from Sender to Receiver.
6
Host Link LED
When this LED is lit, this indicates that the host computer and the Sender unit
are connected together properly.
7
CAT-5 Video Link Input
Connects to the Sender unit via a length of CAT-5 cabling. Used for transmission
of the DVI video signal from Sender to Receiver.
8 DVI
Output
Connect the remote DVI-compliant display device to this port on its input cable.
9
5V DC Locking Power Connector
Supplies secure and safe power to the Receiver unit. Plug in the supplied 5V
DC locking power supply here. Screw in the threaded locking power connector,
being careful not to overly tighten.
