Gefen TOOLBOX GTB-HD4K2K-444-BLK Скачать руководство пользователя страница 13

Страница: 13 / 114

page | 3

Getting Started

Panel Layout

Name

Description

In (1 - 4)

Connect an HDMI cable from an Ultra

Hi-Def source to any of these HDMI ports.

Out (1 - 4)

Connect an Ultra HD display to each of

these ports using an HDMI cables.

FST (Fast / Slow)

Use this recessed button to switch between

Fast and Slow FST (Fast Switching

Technology) modes. See

Fast Mode vs

Slow Mode

for more information on using

FST mode. The LED indicators will display

the current mode.

Audio (2ch / Multi-ch)

Use this recessed button to switch between

2CH and Multichannel audio on the output.

The LED indicators will display the current

mode. See

Selecting the Audio Mode

for

more information on using this feature.

EDID (Int / Ext / Custom)

Use this recessed button to switch between

internal (Int), external (Ext), and custom

EDID modes. The LED indicators will

display the current mode. See

Selecting

the EDID Mode

for more information.

Out 1 - Out 4 (selection)

Press these buttons to change the routing

state of the desired output. See

Routing

Inputs to Outputs

for more information.

The LED indicators will display the current

routing state.

Power

This LED indicator will glow bright blue

when the included 5V DC power supply is

connected from the matrix to an available

electrical outlet.

RS-232

Connect an RS-232 cable from this port to

an RS-232 device. See

RS-232 and IP

Configuration

for more information.

IR Ext

Connect an IR Extender (Gefen part no.

EXT-RMT-EXTIRN) to this port.

(continued on next page)

Содержание GTB-HD4K2K-444-BLK



















































































































Результаты поиска

Содержание GTB-HD4K2K-444-BLK

Отзывы:

Бренды по названию

Популярные бренды

Gefen TOOLBOX GTB-HD4K2K-444-BLK, Руководство пользователя

Результаты поиска

Содержание GTB-HD4K2K-444-BLK

Отзывы:

Бренды по названию

Популярные бренды