Gefen TOOLBOX GTB-HD4K2K-444-BLK Скачать руководство пользователя страница 27

Страница: 27 / 114

page | 17

The 4K Ultra HD 4x4 Matrix for HDMI provides the capability to switch between 2-channel

and multichannel audio output.

Selecting the Audio Mode

Use this audio mode when all displays (and/or other sink devices) support

only

2-channel

LPCM audio.

1. Use a paper clip or other pointed object to press and release the recessed

Audio

button, to toggle between 2-channel and multichannel audio modes.

2. The LED indicator will display the current audio mode.

Supported audio formats

Audio Format

LPCM 2CH

LPCM 8-channel

Dolby® Digital

Dolby® Digital Plus

Dolby® TrueHD

DTS®

DTS-HD Master Audio™

MLP (PPCM)

Press the

Audio

button

to switch the audio mode

Operating the 4K Ultra HD 4x4 Matrix for HDMI

Audio Modes

NOTE:

In order for the audio channel mode to be selected, the

EDID

switch must be set to the

Int

position. If the EDID switch is set

to the

Ext

position, then the

Audio

switch will have no effect on the

audio output signal. See

EDID Modes

for more information on using

the EDID.

NOTE:

When the Audio Mode is set the 2CH, the internal EDID will

restrict the audio output to 2-channel LPCM, regardless of the audio

input format.

Содержание GTB-HD4K2K-444-BLK



















































































































Результаты поиска

Содержание GTB-HD4K2K-444-BLK

Отзывы:

Бренды по названию

Популярные бренды

Gefen TOOLBOX GTB-HD4K2K-444-BLK, Руководство пользователя

Результаты поиска

Содержание GTB-HD4K2K-444-BLK

Отзывы:

Бренды по названию

Популярные бренды