Gefen Pro GEF-DVI-848DL-PB, Руководство пользователя

Страница: 16 / 100

12
IR REMOTE CONTROL UNIT
How to Resolve IR Code Conflicts
In the event that IR commands from other remote controls interfere with the
supplied IR Remote Control unit, changing the IR channel on the IR Remote
Control unit will fix the problem. The IR Remote Control unit has a bank of DIP
switches used for setting the IR channel.
The DIP switch bank is located underneath the battery cover.
1 2
1 2 1 2
1 2
Remote Channel 2:
Remote Channel 0:
Default
Remote Channel 1:
Remote Channel 3:
Exposed DIP Switch
bank between the
battery chambers.
It is important that the IR channel on the Remote Control unit matches the
IR channel set on the 8x8 DVI Dual Link Matrix with Push Button Controls.
For example, if both DIP switches on the IR Remote Control unit are set to IR
channel 0 (both DIP switches down), then the 8x8 DVI Dual Link Matrix with Push
Button Controls must also be set to IR channel 0. See page 58 for information on
how to change the IR channel on the 8x8 DVI Dual Link Matrix with Push Button
Controls.