3
2
1
Mount and Wire
Shut off power at the circuit breaker for the switch that you
are replacing. More than one disconnection may be required
to turn off power. Use a non-contact voltage tester to ensure
that power is off.
*If the wires are placed in an outdoor environment, it is
suggested to install the included waterproof connector
(instead of using the wire nuts).
WARNING:
Risk of electric shock
Mounting Breakdown
Mounting
Bracket
Screws
Wire Nuts
Bracket
Bracket
Screws
• AC 100~240V Power connection. Verify that the supply voltage is correct
• Disconnect Power before operation. Use your home’s circuit breaker to
switch off power. This protects you and your camera.
• Properly ground fixture
• Always follow code standards when installing wired connections
• Consult an electrician if necessary
CAUTION: Risk of fire, do not install near combustible surfaces
STEP 2.
Place adhesive interior grip
inside of bracket and use
the included 3 screws and
3 wall anchors to mount the
camera wherever you like.
STEP 1.
Feed floodlight wires through
the bracket and connect Line,
Neutral, and Ground (if needed)
Wires with provided Wire Nuts.
ON
OFF
Line
Neutral
Ground
*Optional Installation:
Waterproof Connector
