Geemarc CL100, Руководство пользователя

Страница: 7 / 42

6
3 – Dialling mode (Tone/Pulse) settings
The Tone/Pulse switch is factory pre-set to Tone position. In
the UK, all telephone exchanges now use Tone (
T ) dialing. If
your phone does not dial out, it is probably being used from
an older private switch board (PBX). In this case, the
T one/ P ulse switch must be changed to Pulse ( P ).
4 – Time Break Recall setting (300/100)
Your phone works with a time break recall for United
Kingdom (R=100ms). It can be switched to 300ms for other
locations or PBX’s.
5 – Wall mounting
To wall-mount your telephone, turn the “clip” (located in the
base unit, just below the ear piece).
This will ensure that the handset stays firmly in position.
Setting up